Safetypass Pro XM7EC6 Extension Cables for Permanent Installations on Cab-Over Tractors.

Must be used with Main Cable (XM7MC). Fits XM6 and XM7 Cables and Adapters.

Extension Cable Length: 6 feet, 1.8 meters. Extends Main Cable to 17 feet, 5.2 meters.

Allows enough length to route main cable from speed sensor connector to the main cab hinge and up into the cab.

This extension cable is not required for Temporary installations on cab-overs.

We have found that it is a good idea to visually inspect your speed sensor connectors that are located at the rear of the transmission on the output shaft because truck manufacturer's have been known to use alternate connectors that are not listed in the shop manuals in order to meet production quotas. Also, field repairs can change your connector type. Always check your speed sensor connectors BEFORE ordering.

Speed Sensors are always located at the extreme rear of the transmission, on the output shaft of the transmission, just in front of the driveshaft U-joint. Any other location is not correct. If speed sensor can not be found in this specific location the device will not be compatible with your system.